How to Repair a Concrete Tile Roof Yourself
Concrete tile roofs are attractive and timeless, but can leak if not maintained. Though a tile roof can last the lifetime of the house, extreme temperature changes, falling tree branches and other hazards can chip or break individual tiles, exposing the sheathing. Replacing the tiles is not difficult, however if you have any doubts or the damage is in a difficult area, it's always wise to leave it to the professionals.
Materials:
- Replacement tiles matching the damaged tile.
- Ladder
- Hammer
- Roofing nails
- Harness/safety gear
- Pry bar
- Non-skid work shoes
- Gloves
- Safety goggles
- Scrap wood strips
- Wet saw
Procedure:
- Attach safety gear, including gloves and goggles.
- Check that you have all the necessary supplies before you climb on the roof.
- Climb the ladder, being careful of footing to not damage good tiles.
- Survey the entire roof before you begin. Assess any damaged tiles, other than the ones you noticed from the ground.
- Lift the tile above the damaged tile using wood strips to expose the anchoring nail.
- Remove the nail securing the broken tile with a prybar.
- Break the old tile without damaging the good tiles.
- Examine sheathing for further damage which can cause leaks.
- Step down from the roof if the sheathing is damaged.
- You will need to purchase wood sheathing to repair the damaged section.
- You may also need to purchase tar, tar paper and other roofing supplies depending on how the roof was constructed under the tiles.
- Place the new tile under the good old tiles that cover the top of where the new tile is to be placed.
- Carefully hammer a new nail into the hole of the new tile securing it to the sheathing.
- The new tile should fit nicely, however if it is slightly larger or has difficulty fitting into the space, you may need to shave it with the wet saw.